MIBA Res 200

The MIBA RES 200 comprises Sendzimir galvanized rails. The horizontal guides have a thickness of 1.5 mm and are attached every 0.5 to 1.0 m with a specially shaped plate with a 1.5-mm thickness. The vertical guides have a thickness of 1.5 mm and are reinforced with a 1.5-mm-thick corner frame over the entire length. Ball-bearing mounted nylon idlers and tension springs at the front (15000 cycles) ensure smooth up and down movement of the door. A lintel bar with seal is fitted at the top.

Installation dimensions: side stop = 85 mm, upper stop = 200 mm first stop (+0 mm for automation system or +0 mm for manual operation, for second stop)

The hinges are prefitted.

Configure the details of your door

It takes just a few clicks to put together an image of your future door.

You can do this with a photograph of your own façade of with an example façade from this range!

Indicate your preferences using the configurator, and you’ll quickly see the results of your creativity!


Start garage door configurator